Product Specifications
Mid Tower
SGCC sheet metal, tempered glass, ABS, Nylon, Silicon, Zinc alloy, NdFeB magnets
515 x 254 x 522.6 mm
14.79 kg
1 year
Notice
Warranty support is only available for orders shipped within the United States. Orders via forwarding services are not supported.
Please review our full warranty terms for more information.
USB 3.2 Gen 2 Type-C x1
USB 3.2 Gen 1 Type-A x2
Audio Jack x1
Power & Reset Button x1
E-ATX* / ATX / Micro-ATX / ITX
*To install an E-ATX motherboard, the built-in GPU support bracket must be removed.
7
Maximum Amount: 6
Top: 2 x 180 mm / 2 x 140 mm / 3 x 120 mm
Front: 2 x 180 mm
Left: N/A
Right: N/A
Bottom: N/A
Rear: 1 x 140 / 1 x 120 mm
Fan Ports: 1 x PWM repeaters, 6 ports total
Location: 1 x Cable Management Tray
Fan Connectors: 6 ports per repeater x 4-pin PWM
(Connect your primary fan to the white port to control PWM signal.
All other ports mirror the white port’s signal.)
Fan Rated Voltage: 12V
Fan Safety Current: Up to 2.6A across 6 ports
Power Connector: 1 x SATA Power
Power Safety Current: 1 x SATA connector power input, 12V → 2.6A (max)
Height: Up to 195 mm.
Top: 240 / 280 / 360 mm
Front: N/A
Left: N/A
Right: N/A
Bottom: N/A
AIO Thickness Support: Up to 60mm
Length: Up to 410 mm
Width: Up to 195 mm.
1 – 4.5 Slots
If the radiator & fans thickness is greater than 80 mm: 280 mm – 40 mm / 360 mm – 60 mm
ATX
Length: Up to 200mm (Clearance – 260mm)
Right Mount: 2 Storage Bays: 2 x 3.5” / 4 x 2.5”
Cable Management Tray: 1 Storage Bay: 1 x 3.5” / 2 x 2.5”
Storage Bays Included: 2 x (2 x 3.5″ / 4 x 2.5″)
Front: 1 (Built-in)
Top: 1 (Built-in)
Rear Bottom: 1 (Removable)
2x H18 Fan (Front) – Case Version
1x H14 Fan (Rear) – Case Version
(The Loopin™ System is available on the Retail Version only. Pre-installed case fans use single-female fan connectors.)
